View Full Version : extra holes
LAPLANT
11-25-2007, 02:02 PM
Gonna have 2 extra holes in the transom
From where the trim lock was
What do i need to fill these with:confused:
ezstriper
11-25-2007, 05:37 PM
I would use the thickened resin to glass up the holes, you can get the stuff at auto parts stores, body shop supply places, that way you have a permanate repair..Rob
Boston Predictor
11-25-2007, 05:39 PM
If the holes are small enough, you could use epoxy. If they are too big for that you could use wooden dowels and silicone. Geoff_
wickedrister
11-25-2007, 07:19 PM
:surf: 3M makes a good below the water line rated marine sealer. 3M 5200 fast cure or 3M 4200 slow cure sealer. NAPA auto parts can order it for you.
Fred
83PREDICTOR
11-25-2007, 08:27 PM
:surf: 3M makes a good below the water line rated marine sealer. 3M 5200 fast cure or 3M 4200 slow cure sealer. NAPA auto parts can order it for you.
Fred
They also sell it at Walmart for a lot less. I the marine isle
Enticer1
11-25-2007, 08:41 PM
Home Depot carries 5200 at some locations, about 1/3 less than West Marine.:surf::surf: 3M makes a good below the water line rated marine sealer. 3M 5200 fast cure or 3M 4200 slow cure sealer. NAPA auto parts can order it for you.
Fred
vBulletin® v3.7.4, Copyright ©2000-2009, Jelsoft Enterprises Ltd.