WTB HYDROSTREAM PROJECT

[Boston Predictor]

Anyone have an old hydrostream that needs some lovin, drop me a line. Preferably within the area. The worse the condition the better. Looking for a Viper or V king, but open to any other small light hullhttp://forums.screamandfly.com/forums/images/smilies/wink.gif

[Blizz]

Don't forget about the Vector and that it takes big bucks to redo a Stream.

[wickedrister]

http://http://i34.photobucket.com/albums/d117/wickedrister/April2007BeastOfTheEast030.jpg (http://[IMG]http://i34.photobucket.com/albums/d117/wickedrister/April2007BeastOfTheEast030.jpg[/IMG)


If you find one be sure the core is solid. It looks like one big nasty job if the core is bad]
You can find them for sale on hot boat , scream and fly and on e-bay. Good luck! Cool Boats!

[Mark]

Most old Streams and for sure a project boat will have a rotten core. They used only roving over the core and the water makes its way through rotting it out. Not for the faint of heart!

[Kary]

I just ebayed my vector with new gelcoat ready to core for $350 with a trailer!
Where are you guys when I needed to move it for space. Would rather it gone to someone who could appreciate it!

[cooperider]

I just ebayed my vector with new gelcoat ready to core for $350 with a trailer!
Where are you guys when I needed to move it for space. Would rather it gone to someone who could appreciate it!
So what do you have left?

[Chris]

Does this mean I should get the 'Stream forum ready to go on Endless Boating? :D

[Boston Predictor]

Thanks for the input guys. I know hydro's are cheaply built potato chips for the most part, But there is always that "one" lucky deal out there... Im not willing to tackle a rotten core, but the rest I can do. :thumb:
Wicked, is that boat for sale?? Is that a vector or Vking?

There is a viper near by me that Ive been eyeing for a while. Maybe I can get another $300 deal.:D Ive gotta hustle Im on a budget.:lol:

[wickedrister]

Thanks for the input guys. I know hydro's are cheaply built potato chips for the most part, But there is always that "one" lucky deal out there... Im not willing to tackle a rotten core, but the rest I can do. :thumb:
Wicked, is that boat for sale?? Is that a vector or Vking?

There is a viper near by me that Ive been eyeing for a while. Maybe I can get another $300 deal.:D Ive gotta hustle Im on a budget.:lol:
Boston,
Don't think it's for sale. I talked to the dude this past summer at the "Beast of The East" gathering on Lake Anna VA. He had just picked it up for a song and was planning to restore it. Think it was a Vector with a 150 black max but not sure. I will keep an eye out for one :thumb:
Fred

[Blizz]

If you find an older stream that hasn't had the core redone there will be a 99.99999999999% chance that it needs it i know that's not what ya want to hear but that's nature of the beast for old streams.

[83PREDICTOR]

I had an easy chance to pick up a Viper for cheap a few mounths ago but after doing some good recon I found that the old Glastrons were made better. If that dose not tell you anything I dont know what will.

[Boston Predictor]

If you find an older stream that hasn't had the core redone there will be a 99.99999999999% chance that it needs it i know that's not what ya want to hear but that's nature of the beast for old streams.
I dont know.... I'm not trying to argue with ya because your right, but Ive seen many decent project streams that dont have a rotten core. Ive done some thorough searching localy...

[Blizz]

Be very careful trusting an old unrestored stream i'm not saying they'r not out there but they are far and few between.

[wickedrister]

I love the lines on my CVX20 and there were a bunch of cool glastrons built but the HydroStreams are the hands down the "coolest" boats out there.

[Kary]

So what do you have left?


No boats left for sale, that one was one that was very nice for a cheap project
The guy finished the core last night.
I have a TRV 16, an mx15, nordic jetboat to finish over December. I am hoping to start on the Viper in January and in between snowmobiling I can finish it before the end of January. other stuff will come up between. Hopin to snag a Sidewinder sometime. I shoulda kept the one I got early this summer

[Blizz]

Kary if you get another Winder get a Super way cooler than the Lo-Pro.

[cooperider]

No boats left for sale, that one was one that was very nice for a cheap project
The guy finished the core last night.
I have a TRV 16, an mx15, nordic jetboat to finish over December. I am hoping to start on the Viper in January and in between snowmobiling I can finish it before the end of January. other stuff will come up between. Hopin to snag a Sidewinder sometime. I shoulda kept the one I got early this summer

So you got the TRV?

[wickedrister]

:drool: Coop likes TRV's

[Boston Predictor]

I would love to have my old cvx16 back...Green flake with a 75 Johnson. That thing was a little rocket!
I also had a gold one with the same motor

[Kary]

So you got the TRV?
This is a different TRV That guy never called me back or even got in touch with me-I hope I see him again so he will know what a jerkoff I think he is. Like sellin me the grab handle was gonna lower the value of that sh*tbox he sold for a few hundred bux. I offered him $200 for the grab handle......well, got that off my chest. I feel better now.....LOL

[stlcheckmate]

check scream and fly looks like a winner, not sure how far ya wanna drive..

http://forums.screamandfly.com/forums/showthread.php?t=145443

[Boston Predictor]

Good look but that is too far. I may end up getting that viper that I've been eyeing down the street. I know for sure that one is solid. Just needs some cosmetics and an engine/interior. The fun stuff :)

[Kary]

Here is a Viper for $250
http://forums.screamandfly.com/forums/showthread.php?t=146477

[teamhart2]

check this out BP, up in concord pretty sweet although kinda pricey

http://nh.craigslist.org/boa/500096757.html

[Boston Predictor]

check this out BP, up in concord pretty sweet although kinda pricey

http://nh.craigslist.org/boa/500096757.html
Too pricey indeed. thanks though I apreatiate the help;)

[Boston Predictor]

Here is a Viper for $250
http://forums.screamandfly.com/forums/showthread.php?t=146477
perfect I sent him A PM. thanks!