Alpha lower case wanted

[Enforcer 24]

Hey guys, I NEED an Alpha 1 Gen 1 lower (1986) geadr case housing ONLY. No guts/bearings etc. Just a case. Mine has two 3" cracks on the prop hub/output shaft housing. No water in case, yet, and do not want to take the chance of course. If no one has/can get a case, is it wise to weld the cracks? If the drive is down, they go straight in towards the transom and are 180 degrees apart (aprox.) Rather have a good used case. Got one but it's Gen 2 and will not work. Thanks

[Enforcer 24]

Hey guys, I NEED an Alpha 1 Gen 1 lower (1986) geadr case housing ONLY. No guts/bearings etc. Just a case. Mine has two 3" cracks on the prop hub/output shaft housing. No water in case, yet, and do not want to take the chance of course. If no one has/can get a case, is it wise to weld the cracks? If the drive is down, they go straight in towards the transom and are 180 degrees apart (aprox.) Rather have a good used case. Got one but it's Gen 2 and will not work. Thanks

[Enforcer 24]

You can stop looking, I got a case today from Greg @ Kolorcraft. If anyone needs a Gen 2 case, he has it along w/ Bravo (not sure XR, one, etc) bullet nose case for seapump pick-up. Sorry about the wrong thread Chris. I am good at doing that! http://checkmate-boats.com/6/ws/,s,8626072361/Graemlins/biggthumpup.gif