Need prop advice 300 Convincor

[onthehammer]

Hey guys, been really busy here at the shop. I've barely had time to get my boat going. Here's my question, I am running a 300 Convincor without the notched hull powered by a MerCruiser 525SC and bravo drive with nose cone. I've already run a 24 and 26 Bravo prop and keep hitting rev limiter. It took me a couple of weeks to find a 28 and now I have 2 of them to try this weekend, both a lab and standard finish. I am also turning the boat left hand to eliminate the lean and it has worked. Any advice or help would be appreciated.

[lcboater]

i hava a 2003 300 with a notched hull. i am running a lab 28 bravo. works really good,but i am looking for a 30. i am not sure if i can turn a 30 ,but you never know until you try.

[onthehammer]

Well I ran a 28 LH Bravo and a 28 LH Lab Bravo. Results were 4500 rpm with the std 28 and 4900 rpm with the Lab. So it looks like I need a Lab 27 for a final product. If anyone has one Left or right hand let me know. I am also curious about a Maximus. Any help?