I'm looking to upgrade my intake manifold and possibly my carb my 20 foot Senator with a OMC ford 460 powerplant. I'm currently using a 1 inch Wilson carb spacer on a stock iron intake with a Holley 4160 650cfm carb. The first question is what manifold. If I get a Edelbrock Performer ( Idle-5500), I can still use my Wilson spacer.
OR.
There's the Performer RPM air gap that is .500 taller and has a power band 1500-6500rpm. If I go this rout, the Wilson spacer gets tossed in the extra parts pile.
Something tells me to go with standard Performer and the Wilson spacer. Any thoughts??
The next question is should I dump the 4160 650cfm carb and upgrade to a 750 cfm Holley 4160 or 4150??????
I'm starting to enjoy having my boat in MY garage!!! The only problem is, to remove the intake manifold, the valve covers need to come off! To remove the valve covers, the exhaust manifolds have to come off WTF!
OR.
There's the Performer RPM air gap that is .500 taller and has a power band 1500-6500rpm. If I go this rout, the Wilson spacer gets tossed in the extra parts pile.
Something tells me to go with standard Performer and the Wilson spacer. Any thoughts??
The next question is should I dump the 4160 650cfm carb and upgrade to a 750 cfm Holley 4160 or 4150??????
I'm starting to enjoy having my boat in MY garage!!! The only problem is, to remove the intake manifold, the valve covers need to come off! To remove the valve covers, the exhaust manifolds have to come off WTF!