chrisG
Member
I will be listing my 1997 253 Convincor for sale in a couple of weeks. I just thought I would post up some info for anyone who might be in the market soon.
Custom built 496 Gen 6 stroker engine w/Blower Shop 250 S/C and single Pro Systems 1000hp carb.(Blower and carb have about 6 hours on them.)
Crower forged crank and rods. Cp custom blower pistons. 10 qt. Canton oil pan.
AFR 315 cnc heads w/Jesel rockers. New powder coated valve covers.
Hardin Marine Cyclone headers w/new risers and Gibson mufflers. MSD ignition.
Aeromotive A1000 fuel pump, filter, and regulator. All fuel lines recently replaced.
DWP XR drive w/28P Bravo 1 prop. Finned cap and Simerek shower. Imco HD helmet and gimbal ring. Mercruiser HD coupler. Full Imco Hydraulic steering.
Hardin Marine Lifetime s/s water pump with new impeller. All hoses and fittings were recently replaced. Hardin s/s sea strainer w/pressure relief valve.
Hardin Marine oil cooler, Canton oil t-stat, and engine oil preluber system.
Alpine cd w/remote, Alpine F6 pdx amp, (4) Jl 7.7 speakers and (2) Mx650's in cabin.
2005 Load Rite trailer with all new tires including spare.
Engine has about 105 hours on it. This engine originally had a Procharger/R-tech intercooler system on it but it was too much of a science project to maintain so I replaced it with the Blower Shop 250. Boat runs around 80 gps. 82 with a labbed 28 Bravo 1.
Boat shows very well for it's age. Interior is in very good condition. No rips or tears. Gel is in very good condition. No fading. Has newer cockpit cover and full mooring cover.
I have owned boat since 2005 and it's been in fresh water ever since.
Located in western Maine on Long Lake in Bridgton.
Will be asking $24000.00 Have clean titles in hand.
http://checkmate-boats.com/forums/showthread.php?t=32699
Custom built 496 Gen 6 stroker engine w/Blower Shop 250 S/C and single Pro Systems 1000hp carb.(Blower and carb have about 6 hours on them.)
Crower forged crank and rods. Cp custom blower pistons. 10 qt. Canton oil pan.
AFR 315 cnc heads w/Jesel rockers. New powder coated valve covers.
Hardin Marine Cyclone headers w/new risers and Gibson mufflers. MSD ignition.
Aeromotive A1000 fuel pump, filter, and regulator. All fuel lines recently replaced.
DWP XR drive w/28P Bravo 1 prop. Finned cap and Simerek shower. Imco HD helmet and gimbal ring. Mercruiser HD coupler. Full Imco Hydraulic steering.
Hardin Marine Lifetime s/s water pump with new impeller. All hoses and fittings were recently replaced. Hardin s/s sea strainer w/pressure relief valve.
Hardin Marine oil cooler, Canton oil t-stat, and engine oil preluber system.
Alpine cd w/remote, Alpine F6 pdx amp, (4) Jl 7.7 speakers and (2) Mx650's in cabin.
2005 Load Rite trailer with all new tires including spare.
Engine has about 105 hours on it. This engine originally had a Procharger/R-tech intercooler system on it but it was too much of a science project to maintain so I replaced it with the Blower Shop 250. Boat runs around 80 gps. 82 with a labbed 28 Bravo 1.
Boat shows very well for it's age. Interior is in very good condition. No rips or tears. Gel is in very good condition. No fading. Has newer cockpit cover and full mooring cover.
I have owned boat since 2005 and it's been in fresh water ever since.
Located in western Maine on Long Lake in Bridgton.
Will be asking $24000.00 Have clean titles in hand.
http://checkmate-boats.com/forums/showthread.php?t=32699
Last edited:
