Just picked up the boat listed in the subject and overall the upholstery is in good shape but the two side panels in the front have some bad sun damage. How are those removed? I can reach through the sides from the rear and feel the rearmost bolt/nut but there seems to be several more. Any advice on getting those off to have them redone.
-
Welcome to the Checkmate Community Forums forums.
» Interact with over 10,000 Checkmate Fanatics from around the world!
You are currently viewing our boards as a guest which gives you limited access to view most discussions, articles and access to our other FREE features.
By joining our free community you will be able to:
» Post topics and messages
» Post and view photos
» Communicate privately with other members
» Access our extensive gallery of old Checkmate brochures located in our Media Gallery
» Browse the various pictures in our Checkmate photo gallery
Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact support by clicking here or by using the"contact us" link at the bottom of the page.
2013 Pulsare 2400 BRX Upholstery question
- Thread starter sosuok
- Start date
cooperider
Well-known member
That is going to be a tough reach. Some of those panels were installed before the deck was put on the hull.
Other panels if you free them up from behind, you can just slide them upwards, and the mounts will pop out. It's hard to explain without a picture to show you.