boatman4021
Well-known member
If anyone is interested, I have 1 TP 4 blade in stock for $375 w/hub to fit your motor. This is a new prop that I ran for about 20 minutes on my boat. Free ups ground in the US. Thanks, boatman
-
Welcome to the Checkmate Community Forums forums.
» Interact with over 10,000 Checkmate Fanatics from around the world!
You are currently viewing our boards as a guest which gives you limited access to view most discussions, articles and access to our other FREE features.
By joining our free community you will be able to:
» Post topics and messages
» Post and view photos
» Communicate privately with other members
» Access our extensive gallery of old Checkmate brochures located in our Media Gallery
» Browse the various pictures in our Checkmate photo gallery
Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact support by clicking here or by using the"contact us" link at the bottom of the page.
25" Turning Point 4 Blade
- Thread starter boatman4021
- Start date
checkmate243
Member
Daddio,
I purchase a TP 4 blade from boatman for my 225efi. I turn about 5400 rpm with two peolpe. This has been the best prop for my Starflite! Hope this help.
I purchase a TP 4 blade from boatman for my 225efi. I turn about 5400 rpm with two peolpe. This has been the best prop for my Starflite! Hope this help.
fiftyp
Active member
I have tried several props on my boat, this by far is the best one.
fiftyp
Active member
I run a pulse 186 with a 200 merc 2.5l 10" of set back and spin the 25turning point 6100 trimmed all out.
Prop pops out of the hole great, has good mid range, keeps the bow light
in rough water, and is very driver friendly when it comes to chine walk.
I hope next year to have low water a llow water pick up, and try to spin
the 27" TP