ynnad
Member
I added a closed cooling system to my 7.4MPI Enforcer. It cools the engine and the manifolds, and has a blocked gasket between the manifold and riser (stock exhaust, through hull). The raw water exits through the risers.
When it cools down I notice coolant (green with antifreeze) on the engine mounts, some of the plug wires and about a pint in the bilge. While it is not a lot, it concerns me that somewhere it is leaking. I thought it may be at the riser/manifold junction, so I pulled all the bolts between the risers and manifolds and re-sealed and re-torqued them, but I still get about the same amount. I never see any leak when running...
Ideas? Vinny did you ever see this on your system before you went to headers?
Thanks
Dan
When it cools down I notice coolant (green with antifreeze) on the engine mounts, some of the plug wires and about a pint in the bilge. While it is not a lot, it concerns me that somewhere it is leaking. I thought it may be at the riser/manifold junction, so I pulled all the bolts between the risers and manifolds and re-sealed and re-torqued them, but I still get about the same amount. I never see any leak when running...
Ideas? Vinny did you ever see this on your system before you went to headers?
Thanks
Dan