BADBK
Well-known member
Garage space I'll be heating is 15'w x 23'l x 11' h. = 3795.
Of course I'll lose some efficiency simply due to the fact I have the other part of the garage tarped off...
As far as kerosene or propane heaters go, I'm not really considering them for 2 reasons. 1. "Open" flame... not good when you're painting w/garage full of flammable fumes. 2. I've read that they don't do well in dusty environments as far as getting gunked up, igniters not holding up/working after a while, etc.
Side note, spent little over 2 hours working on the 'Flite yesterday and have 90% of the floor out. Pulled up side strips of fiberflass holding plywood to floor and popped the plywood right out. Easy peasy... Need to finish up removing some fasterners so I can split it and cut the transom and very aft floor out.
Of course I'll lose some efficiency simply due to the fact I have the other part of the garage tarped off...
As far as kerosene or propane heaters go, I'm not really considering them for 2 reasons. 1. "Open" flame... not good when you're painting w/garage full of flammable fumes. 2. I've read that they don't do well in dusty environments as far as getting gunked up, igniters not holding up/working after a while, etc.
Side note, spent little over 2 hours working on the 'Flite yesterday and have 90% of the floor out. Pulled up side strips of fiberflass holding plywood to floor and popped the plywood right out. Easy peasy... Need to finish up removing some fasterners so I can split it and cut the transom and very aft floor out.