infiniti383
New member
Bridgeport motor, 12 inch jack. Currently running 25 tempest. Someone had suggested a chopper. What do you guys think is best?
-
Welcome to the Checkmate Community Forums forums.
» Interact with over 10,000 Checkmate Fanatics from around the world!
You are currently viewing our boards as a guest which gives you limited access to view most discussions, articles and access to our other FREE features.
By joining our free community you will be able to:
» Post topics and messages
» Post and view photos
» Communicate privately with other members
» Access our extensive gallery of old Checkmate brochures located in our Media Gallery
» Browse the various pictures in our Checkmate photo gallery
Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact support by clicking here or by using the"contact us" link at the bottom of the page.
prop for starflite
- Thread starter infiniti383
- Start date
infiniti383
New member
tryed that
All the trophy did was improve stability and steering up top and ran slower than the laser prop. Thanx for your thoughts though
All the trophy did was improve stability and steering up top and ran slower than the laser prop. Thanx for your thoughts though
JT Patroni
Well-known member
I have run the Laser 14-1/2" x 22P and a 24P with good success. (Johnson 3L 200hp)
Good lift for the bow with little trim. I have actually trimmed out enough
to loose steering with a slight cross wind (no rooster tail). No jack and the shaft at 4-1/2" below the "V". This set up is not great for top end but ok for me.
Good lift for the bow with little trim. I have actually trimmed out enough
to loose steering with a slight cross wind (no rooster tail). No jack and the shaft at 4-1/2" below the "V". This set up is not great for top end but ok for me.