• Welcome to the Checkmate Community Forums forums.

    You are currently viewing our boards as a guest which gives you limited access to view most discussions, articles and access to our other FREE features.
    By joining our free community you will be able to:

    » Interact with over 10,000 Checkmate Fanatics from around the world!
    » Post topics and messages
    » Post and view photos
    » Communicate privately with other members
    » Access our extensive gallery of old Checkmate brochures located in our Media Gallery
    » Browse the various pictures in our Checkmate photo gallery

    Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact support by clicking here or by using the"contact us" link at the bottom of the page.

sensor on back of block underneath power steering cooler for Bravo 1?

HeavyMetalMarine

HeavyMetalMarine

New member
anybody out there know what the two prong sensor is on the back top of engine block like directly underneath power steering cooler. I just installed a fresh 502 in my 88' Convincor, and have everything wired up ecept that one sensor? I bought the boat with a blown motor that was partially tore down. in the harness i have everything lines up and has connection except that one sensor. the sensor did come from the original block. any ideas?
 
Is it just behind the intake near the distributor? Probably an oil pressure sender for either an idiot light or more likely an electronic oil pressure gauge.
 
I THINK U ARE RIGHT ON MAN. IM PRETTY SURE ITS AN OIL PRESSURE SWITCH THAT, IN MY BOAT ANYWAYS HAS BEEN WIRED TO TRIGGER THE ELECTRIC FUEL PUMP. MAKES SENSE, SO THE PUMP IS ONLY RUNNING WHEN THE BOAT IS RUNNING. THANKS FOR THE REPLY
 
You must log in or register to reply here.
Back
Top