• Welcome to the Checkmate Community Forums forums.

    You are currently viewing our boards as a guest which gives you limited access to view most discussions, articles and access to our other FREE features.
    By joining our free community you will be able to:

    » Interact with over 10,000 Checkmate Fanatics from around the world!
    » Post topics and messages
    » Post and view photos
    » Communicate privately with other members
    » Access our extensive gallery of old Checkmate brochures located in our Media Gallery
    » Browse the various pictures in our Checkmate photo gallery

    Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact support by clicking here or by using the"contact us" link at the bottom of the page.

25" Hydromotive 3 blade, 26" Chopper

C

Checkmark

Member
The Hydromotive looks like new, too much pitch for my setup 260$. The Chopper has a bent tip on one blade, but otherwise is fine. 100$.
 
The Hydromotive looks like new, too much pitch for my setup 260$. The Chopper has a bent tip on one blade, but otherwise is fine. 100$.
 
Hi Check,

Is a Hydromotive prop similiar to a Merc Tempest plus? Does it have alot of bow lift?

SCT
 
Somewhat similar, although the trailing edges are cut like a cleaver. Seemed to lift well, but I couldn't spin it over 6k. I know I jacked high without it letting loose. I would run one of their props, but the price tag on a new one is up there.
 
Ok tell me about the hydromotive. I need a 25" pitch 3 blade. What is the diameter and the condition?
 
It's 15.75" diameter and it's in like new condition. Not a scratch on it. I used it once, and it was too much pitch. Strong prop though. Would like to try another one if I could afford it. I think it would work on a 3L engine, or and I/O.
 
You must log in or register to reply here.
Back
Top