Bilge Paint

[mishawakajim]

Looks like I'm going to have to pull my Engine to replace the Coupler. I was thinking while I had it out it would be a good opportunity to clean and repaint the Bilge. Any recommendations for a good paint to use? Thanks

 

[Gimme Fuel]

Rustoleum with added Enamel Hardener catalyst. Brush or roll it on. Works awesome!

 

[1954bmw]

Rustoleum with added Enamel Hardener catalyst. Brush or roll it on. Works awesome!

What kind of hardener, does Rustoleum make an enamel hardener or some kind of automotive universal hardener for single stage paint???

 

[Gimme Fuel]

What kind of hardener, does Rustoleum make an enamel hardener or some kind of automotive universal hardener for single stage paint???

https://www.tractorsupply.com/tsc/product/majic-catalyst-hardener-clear-half-1-2-pint?cm_vc=-10005

Just plain ole single-stage tractor enamel paint hardener. increases shine and is hard as a rock when it dries. I did the bilge of my 253 with it and it held up awesome. I'll likely do my PQ bilge with it too when engines come out.

 

[ezstriper]

Been using strait rustoleum for years, works great

 

[karzrus]

Pick a light color when you do it. My Eluder came from the factory with the bilge painted black. I switched to light grey and then could see down there under the motor if I dropped anything or the motor was leaking.

 

[Gimme Fuel]

I had it suggested to do the very bottom of the V of bilge under motor in black. That way if the Coasties inspect you, they will have a hard time seeing any oil. I did it on my 253, but yes it makes finding anything down there hard!

 

[mishawakajim]

Thanks for the recommendations guys. I really appreciate your help. Jim