Cannot find correct thrust washer for older quicksilver prop

[bigsbetter]

I bought a set of props off ebay . The number on the prop is 48 13246 A5 23P . They do not say Mirage on them. They are a solid hub( no rubber). The front of the prop which would go up against the gear case is a little different than most newer props and requires a different thrust washer. I really need to post a picture but cannot figure out how to post with my new iPhone. It asks me my URL when I try to post pics but what's my URL or how do I find it?

 

[keith4216]

What drives?

 

[bigsbetter]

1990 bravo one outdrives. I'm expierementing with props. I've tried newer mirages and hydromotives, which I was able to use the same thrust washers for both of those setups.

 

[keith4216]

http://www.generalpropeller.com/pdf/QS2013_Prop_Guide.pdf

Go to page 79 and theres about any thrust washer made with part numbers. See if anything looks right.

 

[bigsbetter]

ThAnks Keith, I checked out your link. Lots of good stuff in there, but I think what I really need is a chart that tells me a part number of a thrust washer for the part number of my props so I don't get the wrong one. I went to 2 prop shops and a big boat dealt with no luck.

 

[keith4216]

Call b blades they can tell you what you need.

 

[wired]

If you want to post the pic email it to me and I can do it for you. mikeprewitt@gmail.com