• Welcome to the Checkmate Community Forums forums.

    You are currently viewing our boards as a guest which gives you limited access to view most discussions, articles and access to our other FREE features.
    By joining our free community you will be able to:

    » Interact with over 10,000 Checkmate Fanatics from around the world!
    » Post topics and messages
    » Post and view photos
    » Communicate privately with other members
    » Access our extensive gallery of old Checkmate brochures located in our Media Gallery
    » Browse the various pictures in our Checkmate photo gallery

    Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact support by clicking here or by using the"contact us" link at the bottom of the page.

Mirage prop for 115

M

Mercmx15

Member
I am still a bit naïve on some topics,
I can get a good deal on a
Mirage Plus 14.3/4 21 pitch

ITS 48-13702A56 that came from a 5 litre merc

Can I install Flo-TORQ HUB KIT 835257K-1 and will it work on my 1978 Mercury 115

Can get it for $80 so want to make sure it will fit.
Thanks
 
Well no help here!
I think 14 3/4 is to big, only list that size for inboards.
All the 115 props seem to be in the 13 inch range.:(
Darn its was going cheep.
 
Mercmx15 said:
Well no help here!
I think 14 3/4 is to big, only list that size for inboards.
All the 115 props seem to be in the 13 inch range.:(
Darn its was going cheep.
Click to expand...

Sorry, nobody chimed in. Your motor requires a small hub 4 1/4" prop. There are few choices in SS. Merc does make a small hub Laser II but make sure you check the part number as they also make a large hub. Powertech makes the most small hub SS props. They are out there used and usually go cheap as people don't know what they are. Probably make a dozen models that will fit your motor.
 
You must log in or register to reply here.
Back
Top