PA-Checkmate
Active member
2002 Convincor that the hatch opens very slow due to voltage drop at lift motor. While opening the voltage drops to about 6 volts and on close it's around 10v. The voltage should be battery(12V) or more if engine is running. Haven't checked supply voltage at switch yet, but think it's related to the wire gauge used along with total length of wire? Anyone else have this issue and was there a fix?
My solution is I'm designing a circuit to feed the lift on the "up" supplied from a source closer to engine or battery.
thanks
My solution is I'm designing a circuit to feed the lift on the "up" supplied from a source closer to engine or battery.
thanks