21starflite
Member
21' flite
86' 150 Rude bolted to the transom
21pitch no name prop
Hit 52 today by myself on glass
86' 150 Rude bolted to the transom
21pitch no name prop
Hit 52 today by myself on glass
Welcome to the Checkmate Community Forums forums.
You are currently viewing our boards as a guest which gives you limited
access to view most discussions, articles and access to our other FREE features.
By joining our free community you will be able to:
Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact support by clicking here or by using the"contact us" link at the bottom of the page.
1986 Exciter with a 1986 Mercury XR2 with some work done
Best speed to date is 65 mph
setup and load for posted speed: 86 18'-6" Exciter, 10" CMC Hydro jack plate, 150 2.0 XR2 with some work done to it, 1.87 lower with Bobs nose cone, 23p Mirage Plus, 30-32 Gallons of gas, 2 guys (450-500lbs), full gear (150 lbs) 6,900 RPM's
I think I will hit 70 mph with a better prop and lighter load...
Wow its been a while since anyone posted here.
This was the first run on the boat since I bought it.
79 Eluder
79 Evinrude 175P V6
14-1/4" 21 pitch prop, not sure what brand it was on the boat when I bought it last week.
With almost full tank of gas 2 large people( 205 and 320ish) and 1 kid 100 pounds or so we hit 50 and 51 around 5200 rpm on GPS today. Lake was fairly smooth.
My tach could be off? I am not sure what max RPM is for that motor. I don't think I was trimmed out enough when we did our first speed test.Something doesn't sound right. You should be on the limiter with that 21 I think.
New to the forum and after reading this thread I realized that mine is definitely one of the slowest on this forum. My specs are listed below, would love to see 50MPH
1977 Trimate, Evenrude 135 V4, No tilt or trim, Beat up aluminum 13x15p prop gets me 42 on the GPS with 9 gallons of gas and two adults 185LBS and 120LBS. RPM's, no clue since I don't have a guage yet.
Looking at a OMC SS 3 Blade 13x21 or
Solas HR Titan 4 Blade 13x21
Am I on the right path? Any help would be greatly appreciated.